From base oil to finished blend — a 100,000-ton annual production capacity serving automotive, industrial and marine markets in more than 30 countries. The export catalog now covers DEO diesel engine oils, the GEO gasoline line and auxiliary oils for drivetrain and hydraulic service. In open-pit mining, that means lubrication built around long shifts, heavy payloads and dust-heavy service bays.
DEO diesel (5W-30 to 20W-50), GEO gasoline (0W-20 to 10W-60) and auxiliary oils — TO-4 multipurpose, hydraulic, gear, LSD, ATF and CVT — 69 specification combinations and 131 pack images in total, produced under the ISO 9001 quality management system.

5 L / 20 L / 208 L
View series →
5 L / 20 L / 208 L
View series →
5 L / 20 L / 208 L
View series →
5 L / 20 L / 208 L
View series →
5 L / 20 L / 208 L
View series →
Top tier · 6 grades
View series →
6 grades · 0W / 5W / 10W
View series →
3 grades · 5W
View series →
3 grades · 5W / 10W
View series →
5W-30 · 1 L / 4 L
View series →
208 L
View series →
208 L
View series →
20 L / 208 L
View series →
208 L
View series →
10 L / 20 L
View series →
1 L
View series →
1 L / 4 L
View series →
1 L / 4 L
View series →
1 L / 4 L
View series →11 distinct SAE viscosity grades across the DEO & GEO engine oil lines — GEO supplied in 1 L / 4 L, DEO in 5 L / 20 L / 208 L. Auxiliary oil codes are listed on their own series pages.
Haul trucks, excavators and wheel loaders run back-to-back shifts under dust, payload and temperature extremes. The drawing above maps the fleet, the haul roads and the lube bay; the points below are where lubrication decisions are actually made.
Fleet availability sets the schedule. Oil checks and changes have to fit into narrow service windows between hauls.
Airborne dust challenges intake filtration and makes clean filling practice part of every oil change in the pit.
Sustained high load keeps sump temperatures up, so viscosity retention over the interval matters more than peak output.
Cold starts at dawn and hot afternoons in the same shift — the grade has to be chosen against the real ambient range.
Sump level, oil pressure and drain condition logged per unit before the shift.
Fluid level and contamination checked against the service record, not by eye alone.
Rams, hoses and reservoir inspected for seepage before loader and excavator duty.
Gear-oil level and breather condition checked on the raised service bay.
Pins, bushings and pivot points relubricated on the machine's own interval.
Replaced at every drain; a blocked breather undoes a clean fill in dusty air.
A repeatable sequence for the lube bay, so the next crew knows exactly what was put into the machine and when.
Walk-down before the shift: leaks, levels, breather and filter condition on each unit.
Draw a representative sample where the fleet log calls for it; label it with unit and hour meter.
Warm drain, replace filters, refill to the specified level with the grade recorded for that unit.
Log grade, pack size, quantity and date so the next service interval stays traceable.
The entire process — R&D, procurement, production, packaging, storage and after-sales — is controlled under ISO 9001.
Approval lines (ACEA and OEM) are printed per grade on each pack. Request the TDS for written specifications before ordering.
A 500 m² standardized R&D center and 10 senior engineers behind every formulation in the catalog.
Licensed importer & exporter (CIQ 8370033000), shipping to Southeast Asia, Africa, South America, Central Asia and beyond.
OEM, private-label and export inquiries are welcome — including fleet supply programs.